Description

Many photographers prefer to use filter holders for added flexibility, control and accuracy. Most of our filters (see list for each holder below) are available in sizes to fit the popular P and Z-Pro filter holders, which you can purchase on this page.

Two recommended Singh-Ray filter combinations using these filter holders:

• Sprocket circular polarizer, Rowell graduated neutral density, Mor-Slo solid neutral density
• Sprocket circular polarizer, Benson reverse graduated neutral density, Mor-Slo solid neutral density

“P” Sprocket Holder

The P holder (49-82mm lens diameters) accepts Singh-Ray 84x84mm square and 84x120mm rectangular filters and P sprocket circular polarizers. Recommended for focal lengths of 28mm on up.

If you routinely shoot with wide-angle lenses, you may want to use the larger Z-Pro holder to help avoid vignetting. The Z-Pro holder has thumbscrews that enable you to remove slots to reduce the thickness of the holder.

In addition to the filter holder, you will need an adapter ring that screws onto the front of your lens, which the filter holder slides onto. You then just slide the filters into the holder. The holders are constructed so you can turn a circular polarizer without turning the holder — or you can turn the holder. With different size adapter rings, you can use the same holder and filters on a variety of lens diameters.

Singh-Ray filters for P holder

• Mor-Slo 5, 10 and 15-stop solid neutral density: 84×84 square or P sprocket circular
• George Lepp solid neutral density: 84×84 square or 84×120 rectangular
• Galen Rowell graduated neutral density: 84×120 rectangular
• Daryl Benson reverse graduated density (neutral, orange): 84×120 rectangular
• Daryl Benson strip (neutral, orange, pink): 84×120 rectangular
• LB warming polarizer: P sprocket
• LB neutral polarizer: P sprocket
• LB ColorCombo polarizer: P sprocket
• Gold-N-Blue polarizer: P sprocket
• LB Color Intensifier: 84×84 square
• Hi-Lux UV: 84×84 square
• Tony Sweet Soft-Ray diffusion: 84×84 square
• A-13 warming: 84×120 rectangular
• Sunset warming: 84×120 rectangular
• #10 magenta: 84×120 rectangular

“Z-Pro” Filter Holder

The Z-Pro holder (49-95mm lens diameters) takes Singh-Ray 100x100mm square filters, 100x150mm rectangular filters and Z-Pro sprocket circular polarizers. Recommended for focal lengths of 20mm and higher.

If you routinely shoot with wide-angle lenses, you may want to use the larger Z-Pro holder to help avoid vignetting. The Z-Pro holder has thumbscrews that enable you to remove slots to reduce the thickness of the holder.

In addition to the filter holder, you will need an adapter ring that screws onto the front of your lens, which the filter holder slides onto. You then just slide the filters into the holder. The holders are constructed so you can turn a circular polarizer without turning the holder — or you can turn the holder. With different size adapter rings, you can use the same holder and filters on a variety of lens diameters.

Singh-Ray filters for Z-Pro holder

• Mor-Slo 5, 10 and 15-stop solid neutral density: 100×100 square or Z-Pro sprocket circular
• George Lepp solid neutral density: 100×150 rectangular
• Galen Rowell graduated density (neutral, orange, pink): 100×150 rectangular
• Daryl Benson reverse graduated density (neutral, orange): 100×150 rectangular
• Daryl Benson strip (neutral, orange, pink): 100×150 rectangular
• LB warming polarizer: Z-Pro sprocket circular
• LB warming polarizer: 100x100mm
• LB neutral polarizer: Z-Pro sprocket circular
• LB neutral polarizer: 100x100mm
• LB ColorCombo polarizer: Z-Pro sprocket circular
• Gold-N-Blue polarizer: Z-Pro sprocket circular
• LB Color Intensifier: 100×100 square
• Hi-Lux UV: 100×100 square
• Tony Sweet Soft-Ray diffusion: 100×100 square
• A-13 warming: 100×150 rectangular
• Sunset warming: 100×150 rectangular
• #10 magenta: 100×150 rectangular

SaveSave

SaveSave

SaveSave

SaveSave